Complete Guide to Flashing Firmware with Pegasus ToolComplete Guide to Flashing Firmware with Pegasus Tool

Complete Guide to Flashing FirmwareComplete Guide to Flashing Firmware

IntroductionIntroduction

Flashing firmware is one of the most important features of Pegasus Tool. This guide will walk you through the entire process.

PrerequisitesPrerequisites

• Pegasus Tool installed and activated
• Original USB cable
• Device with at least 50% battery
• Correct firmware file for your device

Step 1: Download the Correct FirmwareStep 1: Download the Correct Firmware

1. Go to our firmware database
2. Search for your device model
3. Download the matching firmware version

Step 2: Connect Your DeviceStep 2: Connect Your Device

1. Enable USB Debugging
2. Connect device via USB cable
3. Wait for Pegasus Tool to detect it

Step 3: Start FlashingStep 3: Start Flashing

1. Click on Flash tab
2. Select your firmware file
3. Choose flash options
4. Click Start and wait

Important NotesImportant Notes

• Never disconnect during flashing
• Keep device charged
• Use original cables only

TroubleshootingTroubleshooting

If flashing fails, check our troubleshooting guide.